What Is Plugmold? An Introduction to Multioutlet Assembly
Umbra Cappa Adjustable Double Curtain Rod
Window hardware at Kohl's - Shop our entire selection of window hardware and accessories, including this Umbra Cappa Adjustable Double Curtain Rod, at Kohls.com.
Those who are not inclined towards electrical repairs or handyman work do not know what plugmold is. Technically, Plugmold is a product line under the Wiremold Company, which manufactures and designs wire and cable management solution. For handyman or electricians, plugmold is just a strip of outlets.
Many people might have seen a plugmold before but they do not know what is plugmold? and just perceived it as an ordinary outlets. What is plugmold? and the advantages of having one installed on your office or home will be discussed in this article.
What is plugmold? and its uses?
In residential use, plugmold is commonly found on the kitchen where it usually replaced conventional outlets that can disrupt the backsplash. Plugmolds can be mounted on that of the backsplash or just under the cabinets where it is hidden or out of sight. Some electricians install plugmolds on the bottom where the backsplash and the counter meet to hide the dangling cords.
Plugmolds are also known as plug strips or as referred to by the Code, multioutlet assemblies. In school, laboratories, and like locations, plugmolds are commonly installed to ease away from extension cords and to provide convenient plug outlets when it is needed. The set of outlets can be spaced quite close together, in regular intervals, and saves time compared to other installation methods. Computer rooms where several computers must be used at the same time use plugmolds as outlets. Plugmolds allow you to install 6 to 10 outlets in any place that you need them.
What is plugmold? Commercial and industrial use
Plugmolds can be used in electrical or appliance stores where plenty of outlets are needed. For example, a store has lamps that need to be plugged and turned on/off all at once to show to customers. Plugmolds can also be used in industrial applications. An example is a repair shop where several soldering tools are used. Plugmolds allow these tools to be turned on simultaneously without using extension wires or interruption. It saves time and serves as a convenient outlet for the employees.
While you do might not need an electrical permit to install plugmolds, you must still refer to the National Electrical Code or NEC. There you can research about what is plugmold? and what it says about Wiremold and multioutlet assemblies. While the NEC permits surface metal raceways or multioutlet assemblies, there are still limitations on how many appliances you can plugged on plugmolds. The number of appliances are affected by the ampere and voltage rating of the appliances, and the size of wire you used in your plugmolds’ assembly.
If you intend to install plugmolds or multioutlet assemblies on your homes, call a local electrician or refer to the installation guide. Plugmolds can also be bought in two sets: a self contained strip that are easy to install, and a hard wire strip which can be fed with wire mold metal surface raceways. The self-contained strip comes with a protective built-in circuit breaker to avoid overloading the circuit.